====== Cisco SPA2102 ======
{{:wiki:voip:cisco:cisco-spa2102.jpg?direct&300|}}
====== SPA112 a SPA122 ======
{{:wiki:voip:cisco:ciscospa-ata.jpg?200|}}{{:wiki:voip:cisco:spa112.jpg?200|}}{{:wiki:voip:cisco:spa122.jpg?200|}}

**Factory defaults:**
  - Plug in power adapter
  - Plug in a phone to ‘Phone 1′ port of the SPA-2102
  - Dial ∗∗∗∗
  - You should hear ‘Configuration Option Menu’
  - Dial 73738# (RESET#)
  - Press 1 to confirm the reset

**Web management:**
  - Dial ∗∗∗∗ into the phone connected to the ATA device
  - You should hear ‘Configuration Option Menu’
  - Dial 7932#  then press 1# to enable.
  - Then press 1 to save
  - Hang up when you hear option saved.

**IP address:**
  - Plug in Ethernet cable to router and wait for several seconds
  - Dial ∗∗∗∗110#
  - Listen to IP Address which is read back to you

**České tóny:**
  * **Dial Tone :** 425@-10;30(0.33/0.33/1,0.66/0.66/1)
  * **Busy Tone :** 425@-10;10(0.33/0.33/1)
  * **Ring Back Tone :** 425@-10;60(1/4/1)
  * 
**Dial plan:**
  * (*xxx|112|15x|11[0-1,3-9]x|1[0,2-4,6-9]xx|[2-9]xxxxxxxxS0|00[1-9]xx.) 

**Daylight saving:**
  * start=3/-1/7/2:0:0;end=10/-1/7/3:0:0;save=1